REAR MOTORISATION KIT
FOR MANUAL WHEELCHAIRS

Born from the Triride technology, the kit transforms your manual wheelchair into an electronic wheelchair, simply by replacing the motorized wheels with your manual wheels.
The TREKKING POWER kit attaches in seconds and is easily removed, returning the wheelchair to its original state without any structural changes.

Combined with any Triwheel, Triride or Tribike Hybrid model,
it allows you to have a high-performance rear traction or 3X3 three-wheel drive electric vehicle.

Thanks to the appropriate command it is possible to choose the type of traction desired.

INDOOR USE – Thanks to the practical joystick supplied, you can use the Trekking Power kit on your wheelchair to move easily indoors.

OUTDOOR USE 2x – Combined with a manual Triwheel or Tribike, it is possible to use the Trekking Power kit in outdoor environments and have 2 rear drive wheels that can be maneuvered via the front wheel.

OUTDOOR USE 3x – Combined with a Triride or Tribike-E, it is possible to use the Trekking Power kit in outdoor environments and have 1,2 or 3 driving wheels to tackle any type of route.

Only Triride gives you total traction control

FRONT TRACTION + REAR TRACTION = 3X3 TRACTION

NEW

Available the new MTW frame by Triride

Specially dedicated for the installation of the MTW system.
The frame is structural and self-supporting, designed to support the stresses imparted by the front-wheel drive and the Triride rear-wheel drive. The lateral geometry acts as a reinforcement and makes the rear axle easily adjustable in the longitudinal direction.